Gigabit dual band wifi6 access point 12V DC power 1800Mbps Power Amplifier wifi ceiling ap

The XD1800K-M is a ceiling-mounted dual-band wireless access point that utilizes the 802.11ax wireless network standard. It operates in both the 2.4GHz and 5GHz ISM wireless frequency bands, meeting the demand for high-speed wireless internet access for up to 128 concurrent users. With a Gigabit Ethernet interface, it supports remote Power over Ethernet (PoE) supply according to the 802.3af/at standard.In 802.11ax mode, it can achieve a maximum throughput of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, resulting in an overall wireless speed of up to 1800Mbps. This access point offers high performance, high gain, high receiver sensitivity, high bandwidth, low latency, high density, and high access capabilities. It not only provides coverage over larger areas but also delivers enhanced wireless transmission performance and stability.Ceiling-mounted appearance design, integrated Ethernet interface, sleek and aesthetically pleasing design, and convenient deployment. Easily deploy wireless WiFi6 on ceilings or walls without disrupting the overall interior layout, making it the ideal choice for high-density, high-bandwidth wireless access in hotels, supermarkets, offices, conference rooms, KTVs, restaurants, and other environments.

Características del producto

Designed based on carrier standard hardware, with electromagnetic interference resistance that complies with the requirements of YD/T968-2010 “Electromagnetic Compatibility Requirements and Measurement Methods for Telecommunication Terminal Equipment”. It also meets the overvoltage and overcurrent protection requirements specified in YD/T 993-2006 “Technical Requirements and Test Methods for Lightning Protection of Telecommunication Terminal Equipment”, including analog lightning strikes, power line induction, and power line contact, with a protection capability of common mode 6KV and differential mode 1.5KV. The surge protection capability meets the requirements of YD/T1082-2011 “Technical Requirements and Test Methods for Overvoltage, Overcurrent Protection, and Basic Environmental Adaptability of Access Network Equipment”.Enhanced heat dissipation design with optimized heat sinks and air ducts, ensuring uninterrupted operation even in hot summer days. It fully guarantees the real-time, long-term, stable, and efficient transmission of user network data, enhancing the user experience.

Supports the 802.11AX protocol, providing wireless access speeds of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, with a total wireless access speed of 1800Mbps.

Equipped with an external professional WiFi 6 MIMO RF chip to ensure wider signal coverage, higher rates, and longer transmission distances.

Supports HNAT hardware fast forwarding, with wired bidirectional forwarding performance of up to 2Gbps on the WAN port.

Features MU-MIMO, OFDMA, BSS Color, high-speed rates, and improved coverage range, as well as low latency characteristics. Provides better wireless network performance and user experience in high-density network environments and scenarios with a large number of connected devices.

Works with integrated thin and fat software. Can be used individually for small-scale deployments and can be used in conjunction with gateway devices for large-scale deployments. Suits various complex network environments.

Supports remote management via cloud platforms and WeChat Mini Programs. Allows real-time remote viewing, configuration, upgrades, maintenance, and more.

Provides continuous product updates, feature enhancements, and performance optimizations to adapt to various network environments and improve the user experience.

Hardware configuration
Main Chip	MT7621A+MT7905DAN+MT7975DN High-performance enterprise-level chip
Frequency	MIPS dual-core 880MHz
Memoria	256MB
Flash	16 MB
Tecnología inalámbrica	– 2.4G WiFi 22 802.11b/g/n/ax (theoretical maximum speed up to 573Mbps) – 5.8G WiFi 22 802.11a/n/ac/ax (theoretical maximum speed up to 1201Mbps) – 1024QAM high-speed access rate, OFDMA high-density user access – OFDMA/MU-MIMO uplink/downlink – BSS Color spatial reuse – Space-time block code (STBC), low-density parity check (LDPC), beamforming TX/RX for uplink and downlink Power-saving features: single antenna standby technology, dynamic MIMO power-saving technology, enhanced automatic power-saving transmission technology, packet-by-packet power control technology, etc.
Device Interfaces	WAN PoE1/LAN1 10/100/1000Mbps adaptive DC direct power supply interface, suitable for connecting power plugs with an outer diameter of 5.5mm, inner diameter of 2.1mm, and length of 9.5mm or above.
Buttons	Reset button for factory reset (long press for 6 seconds to reset)
Indicators	Status indicators
Antenas	Built-in 2.4G 2dBi FPC antenna * 2 Built-in 5G 2dBi FPC antenna * 2
Power	48V 802.3af/at PoE power supply,DC 12V/1A
Operating/Storage Temperature	-10℃~45℃/-20℃~70℃
Operating/Storage Humidity	10%~90%(non-condensing) / 5%~90%(non-condensing)
Dimensions	19019045mm

WiFi Spec
Gama de frecuencias	2.4G:2.4~2.4835GHz 5G: UNII-1: 5.15~5.35GHz UNII-2: 5.47~5.725GHz UNII-3: 5.725~5.825GHz
Channel	2.4G: 1,2,3,4,5,6,7,8,9,10,11,12,13 5G: 36,40,44,48,52,60,64,149,153,157,161,165
Modulación	802.11b: DSSS (DQPSK, DBPSK, CCK) 802.11g: OFDM (BPSK, QPSK,16-QAM) 802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK,64-QAM, 256-QAM) 802.11ax: OFDMA (BPSK,256-QAM, 1024-QAM)
Transmission Rate	11b up 11Mbps,11g up 54Mbps,11n up 300Mbps 11ac up 864.7Mbps,11ax 2.4G up 573Mbps, 11ax 5G up 1201Mbps

Packaging & Shipping

PREGUNTAS FRECUENTES

¿Se acepta el servicio OEM/ODM? ¿Puedo personalizar mis productos?

Servicio OEM/ODM disponible.

¿Qué tipo de servicio ofrece?

1.Soluciones a medida para sistemas WIFI 2.Sustitución y mejora de conectores, antenas, módulos y sistemas GPS 3.Diseño de logotipos personalizados 4.Creación y aplicación de etiquetas 5.Y mucho más

¿Cuándo puedo obtener el precio?

Nuestro equipo de ventas suele cotizar en 8 horas después de recibir su consulta con todos los detalles. Cualquier caso urgente, póngase en contacto con nosotros directamente por teléfono o enviar eamil a nuestro correo electrónico oficial.

¿Podré ver un prototipo antes de hacer mi pedido?

Sí, antes de que cualquier pedido pase a producción, necesitamos que usted lo vea y lo apruebe.

¿Cuál es el plazo de producción?

Por lo general, nuestro plazo de entrega es de aproximadamente 7 días, dependiendo de la cantidad, sin embargo, si su pedido tiene una fecha límite caliente haremos nuestro mejor esfuerzo para cumplir con su fecha límite.

¿Cómo actualizar el firmware de nuestro router a la última versión?

Si quiere saber más sobre estos servicios, llámenos, estaremos encantados de guiarle en el proceso.