Gigabit dual band wifi6 access point 12V DC power 1800Mbps Power Amplifier wifi ceiling ap

The XD1800K-M is a ceiling-mounted dual-band wireless access point that utilizes the 802.11ax wireless network standard. It operates in both the 2.4GHz and 5GHz ISM wireless frequency bands, meeting the demand for high-speed wireless internet access for up to 128 concurrent users. With a Gigabit Ethernet interface, it supports remote Power over Ethernet (PoE) supply according to the 802.3af/at standard. In 802.11ax mode, it can achieve a maximum throughput of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, resulting in an overall wireless speed of up to 1800Mbps. This access point offers high performance, high gain, high receiver sensitivity, high bandwidth, low latency, high density, and high access capabilities. It not only provides coverage over larger areas but also delivers enhanced wireless transmission performance and stability. Ceiling-mounted appearance design, integrated Ethernet interface, sleek and aesthetically pleasing design, and convenient deployment. Easily deploy wireless WiFi6 on ceilings or walls without disrupting the overall interior layout, making it the ideal choice for high-density, high-bandwidth wireless access in hotels, supermarkets, offices, conference rooms, KTVs, restaurants, and other environments.

Produktmerkmale

Designed based on carrier standard hardware, with electromagnetic interference resistance that complies with the requirements of YD/T968-2010 “Electromagnetic Compatibility Requirements and Measurement Methods for Telecommunication Terminal Equipment”. It also meets the overvoltage and overcurrent protection requirements specified in YD/T 993-2006 “Technical Requirements and Test Methods for Lightning Protection of Telecommunication Terminal Equipment”, including analog lightning strikes, power line induction, and power line contact, with a protection capability of common mode 6KV and differential mode 1.5KV. The surge protection capability meets the requirements of YD/T1082-2011 “Technical Requirements and Test Methods for Overvoltage, Overcurrent Protection, and Basic Environmental Adaptability of Access Network Equipment”.Enhanced heat dissipation design with optimized heat sinks and air ducts, ensuring uninterrupted operation even in hot summer days. It fully guarantees the real-time, long-term, stable, and efficient transmission of user network data, enhancing the user experience.

Supports the 802.11AX protocol, providing wireless access speeds of 573Mbps in the 2.4GHz band and 1201Mbps in the 5GHz band, with a total wireless access speed of 1800Mbps.

Equipped with an external professional WiFi 6 MIMO RF chip to ensure wider signal coverage, higher rates, and longer transmission distances.

Supports HNAT hardware fast forwarding, with wired bidirectional forwarding performance of up to 2Gbps on the WAN port.

Features MU-MIMO, OFDMA, BSS Color, high-speed rates, and improved coverage range, as well as low latency characteristics. Provides better wireless network performance and user experience in high-density network environments and scenarios with a large number of connected devices.

Works with integrated thin and fat software. Can be used individually for small-scale deployments and can be used in conjunction with gateway devices for large-scale deployments. Suits various complex network environments.

Supports remote management via cloud platforms and WeChat Mini Programs. Allows real-time remote viewing, configuration, upgrades, maintenance, and more.

Provides continuous product updates, feature enhancements, and performance optimizations to adapt to various network environments and improve the user experience.

Hardware-Konfiguration
Haupt-Chip	MT7621A+MT7905DAN+MT7975DN High-performance enterprise-level chip
Frequenz	MIPS-Zweikernprozessor 880MHz
Speicher	256MB
Blitzlicht	16MB
Drahtlose Technologie	– 2.4G WiFi 22 802.11b/g/n/ax (theoretical maximum speed up to 573Mbps) – 5.8G WiFi 22 802.11a/n/ac/ax (theoretical maximum speed up to 1201Mbps) – 1024QAM high-speed access rate, OFDMA high-density user access – OFDMA/MU-MIMO uplink/downlink – BSS Color spatial reuse – Space-time block code (STBC), low-density parity check (LDPC), beamforming TX/RX for uplink and downlink Power-saving features: single antenna standby technology, dynamic MIMO power-saving technology, enhanced automatic power-saving transmission technology, packet-by-packet power control technology, etc.
Geräteschnittstellen	WAN PoE1/LAN1 10/100/1000Mbps adaptiv DC-Direktstromversorgungsschnittstelle, geeignet für Anschlusssteckern mit einem Außendurchmesser von 5,5 mm, Innendurchmesser von 2,1 mm und Länge von 9,5 mm oder höher.
Buttons	Reset-Taste zum Zurücksetzen auf Werkseinstellungen (zum Zurücksetzen 6 Sekunden lang drücken)
Indikatoren	Status-Indikatoren
Antennen	Eingebaute 2.4G 2dBi FPC-Antenne * 2 Built-in 5G 2dBi FPC antenna * 2
Strom	48V 802.3af/at PoE power supply,DC 12V/1A
Betriebs-/Lagerungstemperatur	-10℃~45℃/-20℃~70℃
Luftfeuchtigkeit bei Betrieb/Lagerung	10%~90% (nicht kondensierend) / 5%~90% (nicht kondensierend)
Abmessungen	19019045mm

WiFi Spec
Frequenzbereich	2.4G:2.4~2.4835GHz 5G: UNII-1: 5.15~5.35GHz UNII-2: 5.47~5.725GHz UNII-3: 5.725~5.825GHz
Channel	2.4G: 1,2,3,4,5,6,7,8,9,10,11,12,13 5G: 36,40,44,48,52,60,64,149,153,157,161,165
Modulation	802.11b: DSSS (DQPSK, DBPSK, CCK) 802.11g: OFDM (BPSK, QPSK,16-QAM) 802.11n: OFDM (BPSK, QPSK,16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK,64-QAM, 256-QAM) 802.11ax: OFDMA (BPSK,256-QAM, 1024-QAM)
Transmission Rate	11b up 11Mbps,11g up 54Mbps,11n up 300Mbps 11ac up 864.7Mbps,11ax 2.4G up 573Mbps, 11ax 5G up 1201Mbps

Verpackung und Versand

FAQ

Wird der OEM/ODM-Service akzeptiert? Kann ich meine Produkte individuell anpassen lassen?

OEM/ODM-Service ist verfügbar.

Welche Art von Dienstleistung bieten Sie an?

1. kundenspezifische Lösungen für WIFI-Systeme 2. der Austausch und die Verbesserung von Steckern, Antennen, Modulen und GPS-Systemen 3. kundenspezifisches Logodesign 4.die Erstellung und Anbringung von Etiketten 5. und mehr

Wann kann ich den Preis erfahren?

Unser Vertriebsteam bietet in der Regel innerhalb von 8 Stunden, nachdem wir Ihre Anfrage mit allen Details erhalten. Alle dringenden Fälle, kontaktieren Sie uns bitte direkt per Telefon oder senden Sie eamil an unsere offizielle E-Mail.

Kann ich einen Prototyp sehen, bevor ich meine Bestellung aufgebe?

Ja, bevor ein Auftrag in die Produktion geht, müssen Sie ihn sehen und genehmigen.

Wie lange ist die Produktionsvorlaufzeit?

In der Regel beträgt unsere Vorlaufzeit etwa 7 Tage, je nach Menge. Wenn Ihre Bestellung jedoch einen kurzfristigen Termin hat, werden wir unser Bestes tun, um Ihren Termin einzuhalten. Frist einzuhalten.

Wie kann ich die Firmware unseres Routers auf die neueste Version aktualisieren?

Wenn Sie mehr über diese Dienstleistungen erfahren möchten, rufen Sie uns an, wir helfen Ihnen gerne weiter.